Three new design wheels for more mobile individuality
DEZENT AR: For many applications
The new DEZENT AR wheel is characterised by a light, elegant double-spoke design. This makes the rim a perfect fit for the era of electric mobility. It is available in sizes ranging from 7.0x18 to 10.0x20 inches. The look of modern e-cars such as the Ford Mustang Mach-E, Renault Megane E-Tech, VW ID.3, Cupra Born, Mercedes EQA and EQB, as well as the Polestar 2, VW ID BUZZ, Skoda ENYAQ, VW ID.5, BMW i4, or the Tesla Model 3 can be easily individualised with this rim. The DEZENT AR is available in the design variants black or dark.
DEZENT KB: A dynamic all-rounder
Starting from its concave centre section, the new massive one-piece five-spoke wheel, DEZENT KB, exudes a lot of visual dynamism. The new addition to the DEZENT portfolio is available in classic silver and glossy black with a polished front. This rim also offers a wide range of application possibilities. With a total of ten dimensions ranging from 16 to 19 inches and offsets from 25 to 55, owners of vehicles such as the VW T-Cross, VW Polo, VW Golf, VW T-Roc, Hyundai Santa Fe, Hyundai i30, Kia Sorento, Kia Ceed, Kia Niro, Volvo XC40 and XC60, and V90 Cross Country, as well as BEV and HEV models such as VW ID.3, ID.4, ID.5, Hyundai Ioniq, Kia EV6, MG 4, BMW i4, Cupra Born, and Skoda ENYAQ, can fit the DEZENT KB wheel on their vehicles.
DEZENT KC: 6-hole fitment for heavy loads
Doing heavy work and looking good at the same time is not mutually exclusive, as proven impressively by the new DEZENT KC wheel. The classic double-spoke design combined with the 6-hole fitment not only provides a load capacity of up to 1350 kilograms but also adds an individual touch to off-roaders, pick-ups, and enclosed cargo carriers. With the DEZENT KC wheel, available in sizes from 16 to 18 inches and in black and dark design variants, vehicles such as the Toyota Landcruiser, Toyota Hilux, Mercedes Sprinter, and Mitsubishi L200 have an extraordinary addition to everyday life to offer.
Important similarities
Despite rolling along very differently, these three new DEZENT rims have two common features. Firstly, they are free-of-registration thanks to their ECE certificates, which means that they can be installed immediately without any additional hassle. Secondly, they are protected against the influence of road salt and gravel thanks to a particularly durable and hard 3-layer finish (SRC), especially in winter conditions. And the next winter is sure to come.
3D rim configurator
Like all DEZENT rims, these newcomers are 100% fit for TPMS. To see how new rims would look on a specific vehicle model, users can try the DEZENT 3D rim configurator with just a few clicks. Simply select the desired rim in the preferred colour scheme and the corresponding car – the virtual combination will show the result of the chosen combination and facilitate the decision-making process.
Doing heavy work and looking good at the same time is not mutually exclusive, as proven impressively by the new DEZENT KC wheel. The classic double-spoke design combined with the 6-hole fitment not only provides a load capacity of up to 1350 kilograms but also adds an individual touch to off-roaders, pick-ups, and enclosed cargo carriers. With the DEZENT KC wheel, available in sizes from 16 to 18 inches and in black and dark design variants, vehicles such as the Toyota Landcruiser, Toyota Hilux, Mercedes Sprinter, and Mitsubishi L200 have an extraordinary addition to everyday life to offer.
Important similarities
Despite rolling along very differently, these three new DEZENT rims have two common features. Firstly, they are free-of-registration thanks to their ECE certificates, which means that they can be installed immediately without any additional hassle. Secondly, they are protected against the influence of road salt and gravel thanks to a particularly durable and hard 3-layer finish (SRC), especially in winter conditions. And the next winter is sure to come.
3D rim configurator
Like all DEZENT rims, these newcomers are 100% fit for TPMS. To see how new rims would look on a specific vehicle model, users can try the DEZENT 3D rim configurator with just a few clicks. Simply select the desired rim in the preferred colour scheme and the corresponding car – the virtual combination will show the result of the chosen combination and facilitate the decision-making process.